Full-time RFID smart parking lock

- May 08, 2018-

First, parking lock overview

In today's increasingly tense parking spaces, how to avoid private parking spaces being seized by others is a headache. A new type of parking lock in front of the city not only effectively solved this problem, but also played an anti-theft role on the vehicle and was deeply loved by the owners. Special parking locks can effectively and politely prevent other vehicles from occupying special parking spaces: when the car arrives near the parking space, the parking lock can be opened to park the car into the parking space; when the car leaves, lock the parking lock to prevent other vehicles from occupying the parking spaces; After the car is parked in the parking space, the parking lock is locked, and the vehicle anti-theft function can be played at the same time. At the same time, we will increase the management of parking locks, and the parking lot will enhance the management of parking lots and parking lots.

According to the control mode, the parking lock can be divided into manual parking lock, remote parking lock and automatic parking lock. The manual parking lock can open or close the parking lock through a special key; the remote parking lock can be controlled within 20 meters through the handheld wireless remote controller; the automatic parking lock is divided into wireless RF induction and Bluetooth. Auto-sensing type, when the owner's car is within 20 meters from the parking lock, the parking lock will automatically unlock and land. When the owner's car is away from 20 meters, the parking lock will automatically rise and be locked.

Second, wireless automatic parking lock

Wireless auto-sensing parking lock is the experience of our company's product development over the years. It cooperates with well-known parking lock companies in China and is the first wireless automatic parking lock in China. The parking lock automatically senses the position of the vehicle and realizes the functions of “car-to-lock and car-to-lock-off.” This completely frees human operation. It also avoids the owner forgetting to raise the parking lock when he leaves, ensuring that everything is safe. We enjoy the ease of high-tech and avoid the high cost of using Bluetooth induction.

1, working principle:

The automatic induction parking lock is a vehicle adopting radio frequency identification technology, abbreviated as RFID. The user is equipped with an electronic label card. When the vehicle arrives at the parking space, the parking lock receiver automatically recognizes the ID number emitted in the electronic label card. The parking lock is automatically lowered through information processing. The vehicle then enters the parking space when the vehicle leaves. If the ID number of the electronic tag card is not received, the parking lock will automatically increase, which can effectively prevent other vehicles from occupying the parking space.

2, product features

A, function:

Auto-sensing parking locks can effectively and politely prevent other vehicles from occupying dedicated parking spaces. When the host vehicle arrives near the parking space, the parking lock is automatically lowered and the car can be parked in the parking space. When the host car leaves, the parking lock is automatically raised to prevent other vehicles from occupying the parking space.

B, characteristics:

Automatic induction vehicle, easy to use;

Intelligent coding technology, no mutual interference, practical and reliable;

When the rise is blocked, it will fall automatically;

Low pressure alarm, over-current alarm and other functions;

And has a general waterproof function, simple installation, low failure rate and other characteristics;

3, the main product performance parameters

Working environment: -20~55°C;

Protection class: IP65, spray-proof;

Working power: DC6V;

Power usage time: 30-50 days

Automatic sensing distance: 20-30 meters;

4. How to install and use the product

A. After opening the package, connect the battery plug to the control board plug and fix it; about 12 seconds, the parking lock will automatically rise or fall (depending on the location of the electronic label); the parking lock must not be installed in the low-lying or water accumulation place.

B. According to the specific situation (depending on the size of the parking space), it is advisable to install the position after the installation, without hindering other vehicles from reversing. Drill 14mm bottom hole on the floor at the corresponding hole of the parking lock base.

C. Place the M10mm expansion screw inside the ground face, put on the parking lock, and tighten the nut to spray the screw with black oil. At this point, the installation is completed;

5, using instructions

A. Immediately after installation, it can be put into normal use.

B. The electronic tag needs to be mounted on the rearview mirror in the vehicle with a wire.

C. When there is no parking space, the parking lock should be in a raised position.

D. When the car reaches the effective reception range near the parking space, it should wait for the parking lock to drop, and then drop it to the lowest position before parking it in the parking space.

6, daily maintenance and maintenance

A. The structure is simple and the failure rate is low, which is a major feature of the parking lock.

B. When the parking lock movement slows down and is obviously lower than before, it means that the battery should be charged (there is a low voltage alarm).

C. Keep the sanitation around the parking lock. There must be no granular impurities in the base. Add oil once every six months to the parking position.

7, matters needing attention

A. There must be no foreign objects or external forces to hinder the movement of the parking lock during its ascent or descent.

B. The parking lock rises and falls for 4-6 seconds. When the battery voltage drops, the time will be slightly delayed and 10 seconds has not yet reached the highest or lowest position. At this time, the battery is charged.

C. When cleaning the parking lock, do not flush the interior of the parking lock directly with water.

D. The battery is best used for timing charging, which can extend the service life of the battery for more than 4 years (30-50 days to charge once, depending on the frequency of use).

Third, other types of parking lock Introduction

The parking locks that have emerged in recent years have quickly passed through several generations of product forms, and several forms that are still in use on the market today are as follows:

1, manual parking lock

Use a special parking lock key to insert the keyhole, turn the key, and the parking lock arm will automatically fall down and lay flat, take out the parking space key, and the vehicle will be put into the parking space. After the vehicle leaves the parking space. Raise the parking lock arm to the vertical state and the parking lock is automatically locked.

The characteristics of this parking lock are: low price, low grade, and manual operation.

2, remote parking lock

When the owner reaches (or leaves) the parking space within 20 meters, the parking controller can be leveled (or raised) simply by pressing a dedicated remote control button. In special cases, it can also be manually opened using a dedicated key.

The feature of this parking lock is that the wireless remote controller has replaced manual labor and it has become very easy to use.

3, automatic sensor parking lock

Currently, there are two types of inductive parking locks: wireless auto-sensing and Bluetooth auto-sensing parking locks. When the owner's car is near the parking lock, the parking lock automatically lands; when the owner's car is away from the parking lock, the parking lock automatically rises.

The characteristics of the automatic induction parking lock are: fully automatic lifting mode, completely replacing human operation, improving the grade and making life more relaxed and enjoyable.

The wireless auto-sensing parking lock has low cost and is suitable for large area promotion;

The Bluetooth auto-sensing parking lock has high cost and large power consumption.

Radio frequency remote control requires human intervention.