RFID operation flow in equipment inspection business

- Jun 29, 2018-

The inspection work of the equipment is an important measure to ensure the smooth operation of the equipment. The inspection is a time-sensitive work, requiring the duty officer to periodically inspect every inspection point. However, due to manual inspections, it is difficult to effectively supervise on-duty patrol personnel. As a result, various types of accidents often occur due to inadequate inspection reports and untimely failures. In addition, paper inspections cannot pass real-time inspection data. The faults are not handled in a timely manner, affecting the safe and effective operation of various types of equipment. Then what is the operation flow of RFID in the equipment inspection business? The following is a brief introduction for you 

The RFID tags are installed at the existing inspection inspection sites. The tags are initialized to record the basic information of the inspection inspection sites, such as the inspection number and inspection location.

Establish a patrol management information system, manage the various businesses through the system, and practice the operations, management, statistics, and analysis of various patrol operations on the system;

When there is an inspection plan, the plan will be entered into the system, such as inspection personnel, inspection route, departure time, requirements, etc., and then the inspection task will be sent to the RFID handheld reader, and then the inspection personnel will leave;

The patrolling personnel begin patrol inspection according to the patrol tasks. At the detection point, the RFID reader is placed close to the patrol inspection monitoring point, and the detection status of the inspection personnel can be recorded automatically;

The inspection situation and results can be uploaded to the management information system in real time through the wireless LAN network, and can also be returned to the management center to upload the inspection data to the management information system;

The management center can view the completion of the inspection plan through the management information system, and can query and print the corresponding inspection statistics.

The inspection equipment system fully utilizes the physical advantages of RFID technology. It mainly utilizes the characteristics of UHF RFID that does not require contact and reading distance, and does not require manual intervention. This improves the inspection convenience of inspection personnel and greatly reduces inspections. The workload of the inspectors. Reading distance can achieve long-distance data collection and better remote inspection; RFID identification speed, reduce a lot of inspection time, improve efficiency, improve the equipment inspection management level; RFID technology can be appropriate It penetrates cloth, leather, and wood to read the material and is able to fully cope with the challenges of the harsh environment and maintain all-weather work.

What's important is that RFID technology brings real-time and accurate data. It allows managers to obtain insights from their data and translates this insight into best practices for business management, improving management and predictability, and promoting overall Increase efficiency and management.